Magnetic Treating/Calibration Equipment
| Model 595 Magnetreater/Charger |
Model 580 Magnetizer/Treater |
Total Systems Solutions |
| Click on product names below for Technical Data Sheets. | ||
|
The Model 990 Series Magnetreaters are solid-state demagnetizers for stabilization of permanent magnets. Power is continuously variable with a resolution of 0.1%. Two models are available: the 990A and the 990C. Compatible with Gaussmeters and magnet chargers for closed loop control utilizing an analog voltage (990C) or IEEE-488 Bus (talk or listen) option available with the Model 990A. |
| The Model 9500 is a high voltage (2000 VDC), medium energy (4 kJ) combination magnetizer and RINGING demagnetizer designed for processing large volumes of Barium Ferrite and Neodymium (NdFeB) materials. Magnetization of magnetic sensors, multi-pole rotors, permanent magnet motors, loud speakers, load isolators, and large holding magnet applications are all easily achieved with the Model 9500. |
|
|
Model 7161 High Energy Stabilizer is designed for the stabilization of Rare Earth Cobalt magnets. Energy levels range from 300 to 5400 Joules. Recycle rates from 2 pulses per second are available as well as automatic ramping. This unit is also used in conjunction with a Gaussmeter for automatic calibration. |
| The Model 580 Magnetizer/Treater is a combination magnetizer & treater providing a unidirectional pulse for magnetizing and a damped wave/ringing pulse for demagnetizing or calibrating Alnico and Ferrite materials. The Model 580 is a low energy (105 Joules in the magnetizing section and 52 Joules for demagnetizing). The 580 provides a compact magnet processing instrument for use in the engineering lab or on the production line. |
|
|
The Model 595 Magnetreater/Charger is a floor model combination Magnet Charger and Magnetreater® designed for saturating and stabilizing large, highly coercive magnets and magnet assemblies. Two separate energy storage sections are available, one for magnetizing and one for treating. Energy storage configurations start at 2 kJ for each bank and can be expanded to a maximum of 18 kilojoules. |
| Total System Solutions:
Magnetic Instrumentation Inc. can meet your every need from a flexible range of existing
designs. Our innovative and experienced engineers can provide total solutions including
automatic parts handling, magnetizing, measuring, and calibration utilizing built-in or
remote Gaussmeters, Industrial Computers or PLC's. |
|
|
|
Magnetic Instrumentation, Inc. |
