Magnetic Measurement & Test Equipment (Flux)| Click on products names below for Technical Data Sheets. | ||
The Model 2130 Fluxmeter is a fully featured, microprocessor based, high end Fluxmeter with twelve measurement ranges to allow the operator to configure the meter for maximum resolution and accuracy. Features include high accuracy, automatic drift compensation, 12 measurement ranges, five measurement units, a 32 character display with analog, dual limit and RS-232 outputs built-in. |
|
|
The Model 916 Fluxmeter is a wide range, stable, magnetic field measurement instrument providing a measurement range from 1 x 103 to 2 X 109 Maxwell-turns. The Model 916 is used in conjunction with our Helmholtz Coil Systems or Search Coils and adapts easily to engineering, quality control and production field strength measurements. BCD, RS-232C, IEEE-488 Interface, Dual Limit Comparator, and 19" rack mount kit options are also available. |
| Helmholtz Coil Systems are ideally suited for incoming inspection, production and research measurements of a wide range of magnet sizes, materials and geometries. When used in conjunction with an Integrating Fluxmeter, and given the volume of the permanent magnet sample, the intrinsic open circuit operating B (Bdi) can be measured. Custom Helmholtz Coil Systems are also available upon request. |
|
MODEL HCP-10 PRECISION HELMHOLTZ COIL SET, A precision Helmholtz coil set with 10 inch diameter coils, suitable for use with all types of permanent magnets. Construction is aluminum and brass with fully shielded coils. A hand-operated sample rotation mechanism with precise 180o rotation is built in. Sample loading is quick and easy, using a simple hand-operated clamp. The sample holder can be changed to accommodate various sizes and shapes of magnets. This coil set can be used to test the magnetization of sintered ferrite, Nd-Fe-B ("Neo"), sintered rare earth magnets, bonded magnets and other magnet types with largest dimension approximately 3.5 inches. Includes certification of coil constant. Recommended for use with the Magnetic Instrumentation, Inc. Model 2130 Fluxmeter Measurement System. |
|
 |
Model ML-400D Maglab presents an ideal solution for dual purpose, periodic requirements for either Integrating Fluxmeter or Hall Effect Gaussmeter measurements. Measurement ranges offered are 103 to 106 Maxwell-turns full scale and 100 to 100,000 Gauss full scale in four ranges. The ML-400D is available in either a bench or rack mount configuration. |
Magnetic Flux Standard MFS-1, (Volt-Second Generator) is a precision standard with 20 different output pulses with an overall instrument accuracy of ± 0.2%. The MFS-1 is designed to calibrate Electronic Integrating Fluxmeters and Ballistic Galvanometers. |
|
|
|
Magnetic Instrumentation, Inc. |
