|
Magnechargers 8000 Series |
|
Magnechargers 8000 Series |
Description
The 8000 Series Magnechargers are half cycle type magnetizers designed for the magnetization of Alnico and Barium Ferrite permanent magnets and permanent magnet assemblies in high volume production. The 8000 Series Magnechargers are available with output currents from 150 Amps to 6000 Amps and are easily adapted to virtually any production line magnetizing requirement. The modern solid state electronic control circuit working with the heavy duty ignitron (or SCR discharge switches) result in highly reliable, low maintenance equipment. The solid state control circuitry provides precise control over the output power. The 8000 Series Magnechargers are built in NEMA 12 enclosures.
Applications
The 8000 Series Magnecharger, with the proper fixture, is capable of saturating a wide range of sizes and configurations of permanent magnets and assemblies, including PM motors, tachometers, loudspeakers, and meters. There are many types of magnetizing fixtures available for use with magnechargers, including solenoids, pulse transformers, and multipole fixtures.
Features
Specifications
| Model * | Output Current | Power Line Capacity | Power Switch |
| 8001 | 150 Amps | 60 Amps | SCR |
| 8003 | 300 Amps | 100 Amps | SCR |
| 8006 | 600 Amps | 200 Amps | SCR |
| 8020 | 2000 Amps | 200 Amps | Ignitron |
| 8040 | 4000 Amps | 400 Amps | Ignitron |
| 8060 | 6000 Amps | 600 Amps | Ignitron |
*To denote optional polarity reversal capacity add "R" to model number.
Dimensions:
Weight: approximate 200 lb
Width: 26 in
Height: 36 in (optional 18 in high legs)
Depth: 10 in, Model 8060 requires 16 in deep cabinet
Cooling: Some applications may require water cooling
Input Voltage: 50/60 Hz single phase 220 Volt to 600 Volt
Specifications subject to change without notice.
Contact our factory for additional
information.
Magnetic Instrumentation Inc., 8431 Castlewood Dr., Indianapolis, IN 46250-1534
E-mail: maginst@maginst.com, Tel. 317-842-7500,
Fax 317-849-7600
