logonoborder.gif (6994 bytes)

Franklin Tester

Model 7105B

Description

The Model 7105B Franklin Tester provides a means of testing single strips or punchings of flat rolled electrical steel for surface insulation resistance under predetermined conditions of voltage and pressure.

Features

· Reads total current or individual test point voltage
· 3 1/2 digit panel meter
· BCD output option available
· Meets ASTM standard A 717/A  717/M - 95
· Specimen Heater (Optional) 7105 HR (220 VAC only)

Specifications

Test Voltage:  0 to 2 Volts - 1 mv resolution regulation of 0.06%
Panel Meter: 0-1.999 Volts ± 0.1 %
Hydraulic Pressure Gauge:  0-1000.0 PSI ± 0.5%
System Accuracy:  ± 0.6%
System Resolution: 1 mv (0.1% for 1.000 Volt)
Input Power: 105 - 125VAC, 50/60 Hz, 1 Amp Optional 220 VAC, 50/60 Hz
Weight: Electrical Cabinet - 13 lb (5.9 kg), Press and Pump - 138 lb (62.6 kg)

Specifications subject to change without notice.

HOME SITE MAP BACK

Contact our factory for additional information.
Magnetic Instrumentation, Inc., 8431 Castlewood Dr., Indianapolis, IN 46250-1534
E-mail: maginst@maginst.com, Tel. 317-842-7500, Fax 317-849-7600